Actron CP9180 OBD II AutoScanner Plus - Manual (Page 85)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 3
Troubleshooting
8
Vehicle Communication Fault
The vehicle’s control module(s) enters into an unrecoverable state.
1.Turn vehicle key to off
position.
• Wait 10 seconds.
• Press
ENTER.
Operating Error or Erroneous Data.
An Operating Error or Erroneous Data occurs if vehicle’s computer(s)
stop(s) communicating with Scan Tool.
1.Make Selection
• Use
UP or DOWN arrow
key.
•Press
ENTER.
✓
See “Error Messages” on page 5-2 for possible causes.
Press ENTER
To Reset Tool.
Please Turn the
Key Off
For 10 Seconds
Vehicle Comm Fault
=====================
Check Connections
Try Again?
Yes No
Operating Error
Yes
=====================
[
[