Actron CP9180 OBD II AutoScanner Plus User Manual
Page 68
Vehicle Diagnostics
4 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
3.Depending on the Drive Cycle Monitors one of these 2 screens
will be present.
✓
The Scan Tool display is
continuously updated. Only the “inc”
monitors are displayed. Monitors
designated “n/a” or “ok” are not
displayed.
✓
When all Monitors are “OK” the
following Screen is shown.
4.Return to Previous Menu.
Press
BACK
key.
This Drive Cycle
=====================
Catalyst Mon
inc
Htd Catalyst
inc
Evap System Mon
inc
Since DTCs Cleared
=====================
Catalyst Mon
inc
Htd Catalyst
inc
Evap System Mon
inc
OR
OR
This Drive Cycle
=====================
All Monitors OK
Since DTCs Cleared
=====================
All Monitors OK