Actron CP9180 OBD II AutoScanner Plus - Manual (Page 67)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 21
Vehicle Diagnostics
4
From the OBD II Function List:
1. Select Drive Cycle Monitor.
•Use
UP or DOWN arrow
key to highlight Drive Cycle
Monitors.
•Press
ENTER.
✓
Two types of Drive Cycle Monitors are:
❒
SINCE DTCs CLEARED shows status of the monitors since the
Diagnostic Trouble Codes were last erased.
❒
THIS DRIVE CYCLE shows status of monitors since start of
current drive cycle. Refer to the vehicle service manual for more
detailed information on emission-related monitors and their status.
✓
Some vehicles DO NOT support
Drive Cycle Monitors. If vehicle
supports both types of Drive Cycle
Monitors the Menu will display.
2.View Summary of Monitor Status.
•Use
UP or DOWN arrow key (if
required).
OBD II Function List
=====================
View Fre eze Data
Drive Cycle Monitor
O2 Monitor Test
Diag Monitor Tests
On-Board Systems
Record Data
Vehicle Information
I/M Readiness Menu
=====================
Since DTCs Cleared
This Drive Cycle