Actron CP9180 OBD II AutoScanner Plus - Manual (Page 64)

Vehicle Diagnostics
4 – 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
Customize Lines
✓
The Customize Lines allows the number of lines to be shown at one
time to be set from 1 to 8.
✓
Selecting fewer lines provides faster update speeds. The default is a
eight-line display.
From Select Data to View menu:
1. Select Customize Lines.
•Use
UP or DOWN arrow
key until Customize Lines is
highlighted.
•Press
ENTER.
2. Select Display Lines.
•Use
UP or DOWN arrow
key.
•Press
ENTER.
View Freeze Data
When an emission-related fault occurs, certain vehicle conditions are
recorded by the on-board computer. This information is referred to as
freeze frame data. View Freeze Data is a snapshot of the operating
conditions at the time of an emission-related fault.
✓
View Freeze Data can be overwritten by faults with a higher priority.
✓
If codes were erased, View Freeze Data may not be stored in vehicle
memory depending on vehicle.
Select Data to View
=====================
Entire Data List
Custom Data List
Customize Lines
Select Display Lines
=====================
1
2
3
4
5
6