Activeforever Respironics EverGo Portable Oxygen Concentrator User Manual

Page 17

EverGo User Manual

Figure 9. Touch the number to change the

flow setting.

4. To set the device’s flow setting,

first touch the large number (such

as the 2 shown in Figure 9) in the

center of the screen.

5. Each time you press the flow

setting number, an up arrow

and/or down arrow
will appear on the screen.

(Examples are shown in Figures 16-17). To increase the flow

setting, press the up arrow. To decrease the flow setting, press the

down arrow.

The device can be set to: 1, 1½, 2, 2½, 3, 3½, 4, 4½, 5, 5½, and 6.

Warning: It is very important to set your device to your prescribed level

of oxygen flow. Do not increase or decrease your flow rate from your

prescribed level until you first consult with your physician.

Note: When it is turned on, the device will automatically start at the flow

rate setting used when the device was last turned off. As a precaution, each

time you start the unit, verify the flow setting.

6. Position the nasal cannula on your face, as shown below, and

breathe normally through your nose.

Figure 10. Correct position of cannula on your face.