Activeforever Respironics EverGo Portable Oxygen Concentrator - Manual (Page 14)

11
EverGo User Manual
Note: An optional EverGo Smart Battery Charger/Recalibrator (sold
separately) is available for your system. For more information, contact
your home care provider.
o
peraTInG The
e
ver
G
o
d
evICe
Warning: Do not use the device without one battery installed and operating.
• To run the device on battery power, make sure the battery is
properly inserted and sufficiently charged. (The battery(s) should be
fully charged the first time you use it.)
• To run the device using AC power, make sure you have one battery
installed. Follow these steps:
1. Connect the output cable of the AC Power Supply to the
EverGo power inlet.
2. Connect the connector of the AC Power Cord into the AC
power supply.
3. Connect the plug of the AC Power Cord into an AC outlet
installed to meet national or regional electrical code.
Note: The AC Power Supply is equipped with a green light, which
illuminates when it is connected to an energized AC power source.
• To run the device using DC power from an automobile or other
motorized vehicle, make sure you have one battery installed.
Start the vehicle and connect one end of the DC Power Cord to
the device’s power inlet and the other end into the vehicle’s DC
electrical outlet.
Caution: If you operate the EverGo system using the DC power cord
while the vehicle engine is turned off, you could inadvertently drain
the vehicle’s battery.
www.ActiveForever.com