Acroprint ES700 Electronic Time Recorder - Manual (Page 29)

WALL MOUNTING
Caution: The supplied screws are intended for use on a thick wooden wall or wooden column.
Do not use any other materials. The time clock may come off if used on other materials.
WALL
WALL
WALL
S
tep
1 S
tep
3
S
tep
2
Replace cover and lock. Install the supplied wall-mount screws
into a wall by using the template.
Be sure to keep about 6mm(1/4") of the
screw head away from the wall.
The recommended height from the floor
to the bottom of the ES700 is 45".
Unlock the key and remove the cover.
And then hang it on the wall.
24