Acroprint ES700 Electronic Time Recorder - Manual (Page 10)

SETTING THE DISPLAY FORMAT
S
tep
1
Press the SELECT button and position
the under the "TIME" mark. One can
see that the "hour" flashes. (the flashing
means that the number can be changed.)
S
tep
2
Change the "Minute"
In this case, press the CHANGE button
to set at "09". And then press the
button.
At that moment, the "Second" starts to
run from "00".
After you finish setting the time, press
the SET button once again.
Now the hour/minute setting has been
completed. Replace the cover and lock.
Important: Printing will not occur unless
Step 3 is completed.
S
tep
3
Ex: Set the time from 10:08 to 10:09.
TIME
SELECT CHANGE SET
SELECT CHANGE SET
TIME
SELECT CHANGE SET
TIME
TU WE TH FR SA SU MO
Second
Hour Minute
Change the "Hour"
In case of the example, press the
button because the hour is not to be
changed.
At that moment, the flashing changes
from "Hour" to "Minute".
SET
SET
SETTING THE TIME
5