Connecting for evaluation – ACR&Artex Float-Free 406 Memory Capsule User Manual
Page 7
3
Y1-03-0202 Rev. E
4. Connecting for Evaluation
Connect the RLB-35MC to a PC using the following illustration:
PC Testing Computer
RLB-35MC
Power Supply
100-250 VAC 50/60 Cycle
DATA + PWR
DATA
Either the cable between the PC and power supply or the RLB-35MC and
power supply will need to be a CAT-5 “cross-over” cable. The supplied
“green” cable included in the kit is a cross-over cable which can be used.
On the test PC, set the NIC TCP/IP address to 192.168.2.19.
See also other documents in the category ACR&Artex Sensors:
- ARX-50 (13 pages)
- SATELLITE 3 406 (32 pages)
- GlobalFix Pro (31 pages)
- MicroFix 406 GPS PLB (13 pages)
- ME406 ACE ELT (84 pages)
- SARLink View PLB (31 pages)
- TerraFix 406 GPS PLB (17 pages)
- C406-N HM (109 pages)
- Vecta3 (32 pages)
- Mini B300 ILS H2ON (13 pages)
- Float-Free 406 Memory Capsule (26 pages)
- ResQLink PLB (19 pages)
- 16__6 Survival Radio (16 pages)
- SM-2 Marker Light (11 pages)
- Firefly Plus (1 page)
- ThunderBird SSAS (30 pages)
- B406-4 (87 pages)
- Survival Radio (20 pages)
- ResQMate (20 pages)
- GlobalFix 406 GPS Cat II EPIRB (22 pages)
- HydroFix HRU (14 pages)
- Firefly 3 Waterbug (1 page)
- ME406 ACE 455-0023 (33 pages)
- C406-1 HM (90 pages)
- Firefly 2 Doublefly (1 page)
- AquaFix 406 GPS PLB (17 pages)
- SATELLITE2 406 (25 pages)
- C406-2 HM (87 pages)
- ME406 HM (84 pages)
- AeroFix 406 GPS PLB (17 pages)
- SARLink PLB (22 pages)
- ME406 Portable ELT (85 pages)
- GlobalFix iPro (43 pages)
- SLB406 ELT (43 pages)
- G406-4 ELT (86 pages)