ACR&Artex 2-Wire ELT__RSWT Interface - Manual (Page 24)

ACR Electronics, Inc. 570-0049 Revision B
The information within this document and any attached materials is proprietary and confidential
and is not to be disseminated, distributed, or otherwise conveyed throughout your organization to
employees without a need for this information or to any third parties without the express written
permission of ACR Electronics, Inc.
Page 24 of 30
10. SPECIFICATIONS
10.1 INTERFACE MATERIAL
10.1.1 Both interfaces 453-0032 and 453-0041 are made with flame retardant ABS plastic, UL94V-0.
10.1.2 The surface of each interface is polished finish.
10.2 INTERFACE DIMENSIONS
The following dimensions are displayed in [millimeters] and inches
NOTE: Ø is the symbol for diameter
Figure 10: 453-0032 Interface