ACR&Artex 2-Wire ELT__RSWT Interface - Manual (Page 21)

ACR Electronics, Inc. 570-0049 Revision B
The information within this document and any attached materials is proprietary and confidential
and is not to be disseminated, distributed, or otherwise conveyed throughout your organization to
employees without a need for this information or to any third parties without the express written
permission of ACR Electronics, Inc.
Page 21 of 30
8. INTERFACE INSTALLATION
8.1 INSTRUCTIONS
8.1.1 Secure the interfaces 453-0032 and 453-0041 to a structural member using the hardware found
in the 455-0032 and 455-0041 respectively.
2 ea. 201-0810 Screw, PHP 8-32 x 5/8 SS
2 ea. 241-0832 Nut, Hex 8-32 x ¼ SS
2 ea. 246-0001 Washer, Flat #8 OD3/8 SS
2 ea. 247-0800 Washer, Lock Internal Tooth #8
8.1.2 Torque the screws to 8 in-lb (0.90 Nm) ±1 in-lb (0.11 Nm).