Acnodes PC 9150 - Manual (Page 81)

Multiple Monitors
Multiple Monitors support f rom two to six touch screen displays f or one s ystem.
The PenMount drivers for W indows 2000/XP support Multiple Monitors. This f unction supports
from two to six touch sc reen displays f or one system. Each monitor requires its own PenMount
touch screen control board, either installed inside the dis play or in a central unit. The PenMount
control boards must be connected to the computer COM ports via the RS-232 interface. Driver
installation procedures are the same as for a single monitor. Multiple Monitors support the
following modes:
Windows Extends Monitor Function
Matrox DualHead Multi-Screen Function
nVidia nView Function
NOTE: The Multiple Monitor function is for use with multiple displays only. Do not use this
function if you have only one touch sc reen display. Please note once you turn on this
function the rotating function is disabled.
Enable the multiple display function as follows:
1. Check the Enable Multiple Monitor Support box; then click Map Touch Screens to
assign touch c ontrollers to displays.