Acnodes PCH 3582 User Manual
Page 84
Step 2. When the mapping screen message appears, click OK.
Step 3. Touch each screen as it displays
Please touch this monitor. Press „S‟ to skip Following this
sequence and touching each screen is called mapping the touch screens.
Step 4. After the setting procedure is finished, maybe you need to calibrate for each panel and
controller
NOTES:
1. If you used a single VGA output for multiple monitors, please do not use the Multiple Monitors
function. Just follow the regular procedure for calibration on each of your desktop monitors.
2. The Rotating function is disabled if you use the Multiple Monitors function.
3. If you change the resolution of display or screen address, you have to redo Map Touch Screens so