Acnodes PCH 3582 - Manual (Page 37)

Advanced
USB Mass Storage Device Configuration Number of seconds
POST waits for the USB
mass storage device
after start unit command
← Select Screen
↑↓ Select Item
+- Charge Field F1
General Help F10
Save and Exit ESC
Exit
USB Mass Storage Reset Delay [20 Sec]
Device #1 USB Hotplug
Emulation Type [Auto]
V02.68 © Copyright 1985-2009 American Mega trends , Inc.
3.5 Advanced PCI/PnP Settings
This part describes configurations to be made on PCI bus system. PCI, namely Personal Computer
Interconnect, is a computer bus that allows I/O device to operate nearly as fast as CPU in its own way.
Some technical terms will be mentioned here. We recommend that non-professional users not
make changes from factory default settings.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Advanced PCI/PnP Settings Clear NURAM during
System Boot
← Select Screen
↑↓ Select Item
+- Charge Field
F1 General Help
WARNING: Setting wrong values In below
sections
may cause system to malfunction.
Clear NVRAM [No]
Plug & Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
PCI IDE BusMaster [Enabled]
OffBoard PCI/ISA IDE Card [Auto]
IRQ3
[Available]