Accusys ACS-76510 - Manual (Page 25)

Chapter 3 – Setting up the RAID box
25
6. Turn on the ACS-76500/76510 and press the ESC button on the host computer keyboard. The
“>>>” prompt will appear.
7. Type in the command “download” to go to the firmware download mode, then type “1” to
download code (Firmware or Bootcode).
8. Locate the updates firmware file to send. For HyperTerminal, go to the Transfer menu and select
Send Text File.
9. Send the firmware file as a text file. The file will start to download.
10. When the file has been downloaded, after ACS-76500/76510 restarted, the firmware-updating
procedure is finished.
>>> download
restart … 01 GPIO 01 AAA 01 01
========= 76 Download Mode =========
Enter ‘1’ to Download Code (Firmware, Bootcode)
‘ESC’ exit
Caution
Do not turn off the system or interrupt program
during firmware-updating procedure.