Accu-Chek Advantage User Manual
Page 48
ACTION
Turn meter OFF and reinsert Code Key. If this error
display still appears, contact Accu-Chek Customer
Care
SM
at 1-800-858-8072.
The result you have obtained may not be
accurate. A temperature symbol will appear next to
your result in memory. Move to an area between
57° and 104° F, wait 5 minutes and repeat the test.
Do not artificially heat or cool the meter.
If new result is added, the oldest result is deleted.
Change batteries.
Other Information
93
Do not make treatment decisions based on an
error message.
92
DISPLAY
CAUSE
Code key is faulty or
Code Key was removed
while the meter was on.
Temperature is above or
below the operating
range of test strips
(57˚-104˚ F or 14˚-40˚ C).
Appears when meter is
turned on and memory
is full with 100 test val-
ues.
Battery power is low.
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 92