Accu-Chek Advantage User Manual
Page 40
Test strip symbol
flashes.
The meter quickly goes
through a series of inter-
nal checks.
This brief test allows
you to make sure your
meter is functioning
properly. “OK” and “✔”
should appear on the
display.
The test strip symbol
flashes. “L1” and “✔”
appear.
Other Information
77
Running a Control Test
with Accu-Chek
Advantage Test Strips
Important: Use only
Accu-Chek Advantage
control solutions with
Accu-Chek Advantage test
strips.
1. Turn meter ON.
2 Insert Chek Strip
(“Chek” side up) into
the meter.
You may stop here by
removing the Chek
Strip and turning the
meter OFF or you may
continue your quality
control checks with
steps 3-8 using your
Accu-Chek Advantage
glucose control solu-
tion.
3. Remove Chek Strip
from meter.
Quality Control Testing
76
ON / OFF
MEM
A
CCU
-C
HEK
®
Advantage
®
ON / OFF
MEM
A
CCU
-C
HEK
®
Advantage
®
362-11463 AdvMan Classic-ENGL 7/15/02 12:05 PM Page 76