JVC DLA-HD100 - Manual (Page 45)

45
ENGLISH
Getting Started
Preparation
Basic
Operation
S
ettings
Troubleshooting
Othe
rs
„
Command and data
Operating command and data (Binary code)
Command Type Data description
0000 Connection check
Checks whether communication is available between this unit and
the PC during standby.
5057 Power supply
During standby
31 : Turns on the power.
During power on
30 : Turns off the power. (Standby mode)
4950 Input
During power on
30 : S-VIDEO
31 : VIDEO
32 : COMP.
36 : HDMI 1
37 : HDMI 2
4754 Gamma table
During power on
30 : Switches to “Normal”.
31 : Switches to “Theater1”.
32 : Switches to “Theater2”.
33 : Switches to “Dynamic”.
34 : Switches to “Custom”.
4750 Gamma coefficient
30 : 1.8 35 : 2.3
31 : 1.9 36 : 2.4
32 : 2.0 37 : 2.5
33 : 2.1 38 : 2.6
34 : 2.2
4752 Gamma data (R)
Sets the gradation (0 to 1023) of the output signal in hexadecimal.
The data is 16 bit (2 byte) with the 2 byte data in the high/low order.
4747 Gamma data (G) Same as gamma data (R).
4742 Gamma data (B) Same as gamma data (R).
5453 Test pattern
During power on
30 : Do not display.
36 : Displays staircase (gray).
5243 Remote Control
Sends the same code as the supplied remote control.
z “Remote control code” (p P47)
DLA-HD100U_EN.book Page 45 Monday, February 25, 2008 4:53 PM