beautypg.com

Setting menu – JVC DLA-HD100 User Manual

Page 25

background image

25

ENGLISH

Getting Started

Preparation

Basic Operation

Settings

Troubleshootin

g

O

thers

Item values shown in

are factory settings.

z

Items that can be configured differ according to the input signals.

z

“Contrast”, “Brightness”, “Color” and “Sharpness” can also be configured from the remote control. (p

P12)

z

“Tint” can only be adjusted when NTSC signals are input to the video or S-video input terminal.

* The red, green and blue colors can be adjusted and registered respectively.

z

This setting can also be configured from the remote control. (p

P12)

Setting Menu

Image > Image Adjust

A

Contrast

Adjusts the contrast of the projected image.

(Black) b50 to 50 (White)

B

Brightness

Adjusts the brightness of the projected image.

(Darken) b30 to 30 (Brighten)

C

Color

Adjusts the color density of the projected image.

(Lighten) b50 to 50 (Darken)

D

Tint

Adjusts the hue of the projected image.

(Red) b30 to 30 (Green)

E

Sharpness

Adjusts the outline of the projected image.

(Soft) b30 to 30 (Sharp)

F

DNR

Adjusts the strength of noise removal of the projected image.

(Weak) 0 to 30 (Strong)

Image > Color Temp.

G

Color Temp.

Sets the color temperature of the projected image.

Low

Select this to give a reddish tinge to the image.

Middle

Select this to have a balanced image.

High

Select this to give a bluish tinge to the image.

Memory10

Red

(Less red) b255 to 0 (More red)

Green

(Less green) b255 to 0 (More green)

Blue

(Less blue) b255 to 0 (More blue)

Memory20

Red

(Less red) b255 to 0 (More red)

Green

(Less green) b255 to 0 (More green)

Blue

(Less blue) b255 to 0 (More blue)

DLA-HD100U_EN.book Page 25 Monday, February 25, 2008 4:53 PM