JVC KD-AVX40 - Manual (Page 61)

SETTINGS
59
ENGLISH
Menu items Selectable settings, [reference page]
Device Menu
Delete Pairing Only for the registered devices.
Delete the registered devices, ☞ [35]
New Pairing Enter the PIN code to establish the connection, ☞ [34]
Once the connection is established, it is registered in the unit. You
can connect the unit and the device by using /
from the next time on, ☞ [58]
Settings
Auto Connect When the unit is turned on, the connection is established automatically
with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Auto Answer Off: The unit does not answer the calls automatically. Answer the calls
manually.
On: The unit answers the incoming calls automatically.
Reject: The unit refuses all incoming calls.
SMS Notify Off: The unit does not inform you of the arrival of a message.
On: The unit informs you of the arrival of a message by ringing and
displaying “Receiving Message.”
Add Phonebook Copy the phone book memory of a cellular phone into the unit. You can
register up to 100 phone numbers, ☞ [37]
MIC Setting Adjust the volume of the microphone connected to the unit.
01, 02, 03
Phone Volume Adjust the phone volume.
00 to 30 or 50*
4 , Initial 15
Initialize Initialize all settings you have made in .
Yes: Initializes the settings.
No: Cancels.
Information The following information is shown:
Name: The unit name
Address: The Mac address of the unit
Version: The Bluetooth software/hardware versions*
5
Phone Device/Audio Device: The connected device names
* 1 Items listed under vary among the playback sources.
* 2 KD-AVX40 only
* 3 Only for the device connected for Bluetooth phone.
* 4 Depends on the amplifier gain control. (☞ page 57)
* 5 If you wish to receive more information about Bluetooth, visit the following JVC web site:
(English website only)
When operating the Bluetooth device, refer also to the instructions supplied with the device.
EN_KDAVX4020[E]5.indb 59 EN_KDAVX4020[E]5.indb 59 08.12.25 4:38:24 PM 08.12.25 4:38:24 PM