JVC KD-AVX40 - Manual (Page 36)

34
ENGLISH Connecting/disconnecting a registered
device
1
2
3
4
Select the desired setting.
• For connecting: Select/
then go to the next step.*
• For disconnecting: Select /
.
5
Select the registered device you want to
connect.
* When a device has already connected to the unit,
and do not
appear.
The device remains registered even after you
disconnect the device. Use (or
activate ) to connect the same
device from next time on. (☞ pages 58 and 59)
3
4
Enter a PIN (Personal Identification Number)*
code to the unit.
• You can enter any number you like (1-digit to
16-digit number).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
• To delete an unwanted digit, select a blank.
5
starts flashing.
6
Operate the target Bluetooth device. (While
“Open...” is displayed on the monitor.)
Enter the same PIN code (as entered in the above
step) on the device to be connected.
Now connection is established and you can use the
device through the unit.
turns blue and the following icon appears when the
connection is established.
Appears when the Bluetooth phone is
connected.
Appears when the Bluetooth audio player is
connected.
Appears when the Bluetooth phone and the
Bluetooth audio player are connected.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (☞ page
59)
EN_KDAVX4020[E]5.indb 34 EN_KDAVX4020[E]5.indb 34 08.12.25 4:38:09 PM 08.12.25 4:38:09 PM