Instrument panel indicators – HONDA 2010 Civic Hybrid User Manual

Page 63

If this indicator comes on when the
ignition switch is turned to the ON
(II) position and the parking brake is
released, it means there is a problem
with a circuit. Have your vehicle
checked by your dealer.

This indicator comes on with the
high beam headlights. For more
information, see page

This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page

This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the

position. If you turn the

ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning off the light switch, this
indicator will remain on. A reminder
chime will also sound when you open
the driver’s door and remove the key
from the ignition switch.

This indicator comes on if the trunk
lid is not closed tightly.

This indicator comes on if any door
is not closed tightly.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If it comes on while driving,
it indicates that one or more of your
vehicle’s tires are significantly low
on pressure.

If this happens, pull to the side of the
road when it is safe, check which tire
has lost the pressure, and determine
the cause. If it is because of a flat tire,
replace the flat tire with the compact
spare (see page

), and have the

flat tire repaired as soon as possible.
If two or more tires are underinflated,
call a professional towing service
(see page

). For more

information, see page

313

333

272

U.S. models only

Instrument Panel Indicators

‘‘Daytime Running
Lights’’ Indicator

High Beam Indicator

Lights On Indicator