HONDA 2010 Civic Hybrid - Manual (Page 302)

If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air dry before
you use the vehicle.
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.
If you use non-Honda floor mats,
make sure they fit properly and that
they can be used with the floor mat
anchors. Do not put additional floor
mats on top of the anchored mats.
The driver’s floor mat that came
with your vehicle hooks over the
floor mat anchors. This keeps the
floor mat from sliding forward and
possibly interfering with the pedals.
If you remove the driver’s floor mat,
make sure to re-anchor it when you
put it back in your vehicle.
Make sure the rear floor mats are
properly positioned. If not, the floor
mat will interfere with the seat
operation and make the front
passenger’s weight sensors
ineffective.
Cleaning the Seat Belts, Floor Mats
Floor Mats Cleaning the Seat Belts
Ma
int
e
na
nce
299
LOOP
09/07/15 11:10:25 31SNC640_304
2010 Civic Hybrid