HONDA 2010 Civic Hybrid - Manual (Page 77)

Turn signal
Off
Parking and interior lights
Headlights
High beams
Flash high beams
Push down on the
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
Turning the switch to
the ‘‘ ’’ position turns on the
parking lights, taillights,
instrument panel lights, side-
marker lights, and rear license
plate lights.
When the light switch is in the
‘‘
’’ or ‘‘ ’’ position, the
lights on indicator comes on as a
reminder. This indicator stays on
if you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position.
Turning the switch to the ‘‘ ’’
position turns on the headlights.
If you leave the lights on with the
key removed from the ignition
switch, you will hear a reminder
chime when you open the driver’s
door.
Push the lever
forward and the high beam
indicator will come on (see page
). Pull it back to return to low
beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as
long as you hold the lever back.
1.
2.
3.
4.
5.
6.
60
Turn Signals and Headlights
Turn Signal
Headlights
High Beams
74
09/07/15 10:39:40 31SNC640_079
2010 Civic Hybrid