beautypg.com

Adding engine oil, changing the oil and filter – HONDA 2010 Civic Hybrid User Manual

Page 289

background image

Always change the oil and filter
according to the maintenance
messages shown on the information
display. The oil and filter collect
contaminants that can damage your
engine if they are not removed
regularly.

Run the engine until it reaches
normal operating temperature,
then shut it off.

Open the hood, and remove the
engine oil fill cap.

Your vehicle does not require any oil
additives. Additives may adversely
affect the engine or transmission
performance and durability.

Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.

You may use a synthetic motor oil if
it meets the same requirements
given for a conventional motor oil: it
displays the API Certification Seal,
and it is the proper weight. You must
follow the oil and filter change
intervals shown on the information
display.

Remove the nine holding clips
with a flat-tip screwdriver and two
bolts, then pull the under-cover
down.

1.

2.

3.

Only on U.S. models

Changing the Oil and Filter

Synthetic Oil

Engine Oil Additives

Adding Engine Oil, Changing the Oil and Filter

286

HOLDING CLIP

BOLTS

09/07/15 11:08:23 31SNC640_291

2010 Civic Hybrid

This manual is related to the following products: