HONDA 2013 Civic Coupe - Manual (Page 299)

uu If a Tire Goes Flat u Changing a Flat Tire
298
Han
d
lin
g the U
n
expected
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
80 lbf∙ft (108 N∙m, 11 kgf∙m)
1. Remove the center cap.
2 . Place the flat tire face dow n in the
spare tire well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing bolt.
4. Securely put the jack and wheel nut
wrench back in the tool case. Store the case
in the trunk.
■ Storing the Flat Tire 1 Storing the Flat Tire
3 WARNING
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Spacer
Cone
Wing
Bolt
For compact spare tire
For full-
size tire
Models with aluminum wheels
All models
13 CIVIC 2D-31TS86100.book 298 ページ ２０１２年１０月２６日 金曜日 午前８時４９分
2013 Civic Coupe
Home
QRG
Index
TOC