HONDA 2013 Civic Coupe User Manual
Page 260
259
uu
Maintenance Under the Hood
u
Transmission Fluid
Main
tenan
ce
4. Remove the transmission filler bolt and
washer. Carefully feel inside the bolt hole
with your fingers.
u
Check if the fluid level is up to the edge
of the bolt hole.
5. If the fluid level is not up to the edge of the
bolt hole, add Honda Manual Transmission
Fluid (MTF) until it runs out of the hole.
6. Put a new washer on the filler bolt, then
reinstall the filler bolt.
u
Tightening torque:
33 lbf∙ft (44 N∙m, 4.5 kgf∙m)
7. Reinstall the left side under cover with the
holding clip and the bolt.
8. Reinstall the under cover with the bolts.
1.8 ℓ engine models
2.4 ℓ engine models
All models
1.8 ℓ engine models
13 CIVIC 2D-31TS86100.book 259 ページ ２０１２年１０月２６日 金曜日 午前８時４９分
2013 Civic Coupe
Home
QRG
Index
TOC