HONDA 2013 Accord Coupe User Manual
Page 72
71
uu
Indicators
u
Continued
Indicator
Name
On/Blinking
Explanation
EPS (Electric
Power Steering)
System Indicator
●
Comes on when you turn the ignition switch to
ON
(
w
*1
, and goes off when the engine starts.
●
Comes on if there is a problem with the EPS
(Electric Power Steering) System.
●
Stays on constantly or does not come on at
all - Have the vehicle checked by a dealer.
2 If the EPS System Indicator Comes On
Low Tire
Pressure/TPMS
Indicator
●
Comes on for a few seconds when you turn the
ignition switch to ON
(
w
*1
.
●
May come on briefly if the ignition switch is
turned to ON
(
w
*1
and the vehicle is not moved
within 45 seconds, to indicate the calibration
process is not yet complete.
●
Comes on and stays on when:
- One or more tires’ pressures are determined to
be significantly low.
- The system has not been calibrated.
●
Comes on while driving - Stop in a safe
place, check tire pressures, and inflate the
tire(s) if necessary.
●
Stays on after the tires are inflated to the
recommended pressures - The system needs
to be calibrated.
●
Blinks for about one minute, and then stays on if
there is a problem with the TPMS, or when a
compact spare tire is temporarily installed.
●
Blinks and remains on - Have the vehicle
checked by a dealer. If the vehicle is fitted with
a compact spare, get your regular tire repaired
or replaced and put back on your vehicle as
soon as you can.
Turn Signal and
Hazard Warning
Indicators
●
The turn signal indicators blink when you operate
the turn signal lever.
●
If you press the hazard warning button, both
indicators and all turn signals blink at the same
time.
●
Does not blink or blinks rapidly - A turn
signal light bulb has blown. Change the bulb
immediately.
2 Replacing Light Bulbs P. 479
2013 Accord Coupe
In
st
ru
men
t P
a
ne
l
TOC
Home
QRG
Index
*1
:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.