HONDA 2013 Accord Coupe - Manual (Page 479)

478
uu Replacing Light Bulbs u Fog Light Bulbs *
Fog Light Bulbs *
When replacing, use the following bulbs.
1. Remove the screw using a Phillips-head
screwdriver and carefully pull the fog light
assembly out of the bumper.
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert a new bulb into the fog light
assembly and turn it to the right.
5. Insert the coupler into the connector of the
bulb.
Fog Light: 35 W (H8)
1 Fog Light Bulbs *
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Screw
Tab
Coupler
Bulb
* Not available on all models
2013 Accord Coupe
Ma
inte
na
n
ce
TOC
QRG
Index
Home