2 inspecting and changing fuses p. 526, Inspecting and changing fuses – HONDA 2013 Accord Coupe User Manual
Page 527
526
uu
Fuses
u
Inspecting and Changing Fuses
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK
(
0
*1
. Turn
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
There is a fuse puller on the back of the engine
compartment fuse box cover.
Combined
Fuse
Blown Fuse
Fuse Puller
2013 Accord Coupe
Hand
lin
g t
h
e U
n
exp
e
ct
ed
TOC
QRG
Index
Home
*1
: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.