FIAT 500 User Manual

Page 61

Text mode
Original mode

BONNET

OPENING

Proceed as follows:
❒ pull lever A fig. 59 in the direction indicated by the

arrow;

❒ move the lever B fig. 60 to the right as shown in

the figure;

❒ lift the bonnet and, at the same time, release the

supporting rod C fig. 61 from its catch D, then
insert the end of the rod into housing E in the
bonnet (larger hole) and push to safety position
(smaller hole), as shown in the figure.

WARNING

The bonnet may drop suddenly if the
supporting rod is not positioned

properly. Only perform these operations when
the car is stationary.

fig. 59

F0S0045

fig. 60

F0S0046

fig. 61

F0S0047

GETTING TO

KNOW YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX