FIAT 500 - Manual (Page 146)

DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protective rubber cap mentioned
above;
❒ press the fastener A fig. 113 and remove the bulb
holder;
❒ remove the pressure-fitted bulb and replace it;
❒ refit the cap locking it correctly;
❒ refit the rubber cap.
With gas discharge bulbs (Xenon)
(for versions/markets where provided)
WARNING
Due to the high power supply voltage,
gas discharge bulbs (Xenon) should only
be replaced by specialised personnel: danger of
death! Go to a Fiat Dealership.
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protective rubber cap mentioned
above;
❒ release the two bulb holding clips A fig. 114;
❒ extract the bulb and replace it;
fig. 113 F0S0053 fig. 114 F0S0054
143
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX