FIAT 500 - Manual (Page 60)

PARTIAL EXTENSION (50/50)
(for versions/markets, where provided)
Proceed as follows:
❒ lift out rear seat head restraints (where provided)
with backrest released and tilted toward the
passenger compartment or with the tailgate open
❒ check that the seat belt is fully extended and not
twisted
❒ operate lever A fig. 58 or B to release the left
hand or right hand part of the backrest
respectively and fold it down onto the cushion.
IMPORTANT To return the backrest to its correct
position, we recommend operating from the outside
through the doors.
TOTAL EXTENSION
Tilting the rear seat completely forwards allows
maximum loading volume.
Proceed as follows:
❒ remove the rear seat head restraints (where
provided)
❒ check that the seat belts are correctly extended
and not twisted
❒ operate the levers A fig. 58 and B to release the
backrests and guide them down onto the cushion.
IMPORTANT To return the backrest to its correct
position, we recommend operating from the outside
through the doors.
REPOSITIONING THE REAR SEAT
Raise the backrests and push them back until the
locking click of both retainers is heard.
Position the seat belt buckles upwards and set the
cushion to the position of normal use.
IMPORTANT When returning the backrest to its
normal position, make sure that it is correctly
fastened and that you hear the lock click.
Make sure the backrest is properly secured at both
sides to prevent it moving forward in the event
of sharp braking that may cause injuries to
passengers.
REMOVING THE PARCEL SHELF
To remove the rear shelf, release it from its two side
pins and pull it out.
fig. 58 F0S0017
57
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX