FIAT Punto 2012 - Manual (Page 96)

F0U0619m fig. 101
CLOSING
Proceed as follows:
❒ hold the bonnet up with one hand and with the other
remove the rod C-fig. 103 from the hole E and fit it
back into its catch D-fig. 102;
❒ lower the bonnet to approximately 20 centimetres from
the engine compartment, then let it drop. Make sure
that the bonnet is completely closed and not fastened
only by the safety catch. If it is not perfectly closed, do
not try to press the bonnet lid down but open it and re-
peat the procedure.
IMPORTANT Always check that the bonnet is closed
properly to avoid it opening while the car is travelling.
The following plate is applied inside the engine compart-
ment:
94
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
F0U0102m fig. 102