FIAT Punto 2012 - Manual (Page 177)

175
F0U0137m fig. 148 F0U0138m fig. 149
❒ use the wrench provided to fasten the bolts complete-
ly in a criss-cross fashion as per the order illustrated
in fig. 149;
❒ if you are replacing an alloy wheel and wish to store it
temporarily in the spare wheel compartment, you
should position it upside down.
❒ for versions with hub caps, remove the cap after un-
screwing the 3 fastening bolts and then unscrew the
fourth bolt L-fig. 148 and remove the wheel;
❒ make sure the contact surfaces between spare wheel
and hub are clean so that the fastening bolts will not
come loose;
❒ fit the spare wheel by inserting the first bolt two threads
into the hole closest to the inflation valve;
❒ fit the hub cap by aligning the crescent hole with the
bolt you have fitted using the wrench;
❒ tighten the fastening bolts;
❒ turn the jack handle L-fig. 147 to lower the car, and
remove the jack;
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS