FIAT Punto 2012 - Manual (Page 193)

191
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
F0U0160m fig. 174
F0U0159m fig. 173
❒ change the bulb fig.174 by releasing it from the side
contacts and making sure the new bulb is correctly fas-
tened between these contacts;
❒ refit the snap-fitted lens unit.
F0U0163m fig. 175
CHANGING AN INTERIOR BULB
For the type of bulb and relevant power rating, see
“Changing a bulb”.
FRONT CEILING LIGHT
Proceed as follows to replace the bulbs:
❒ manipulate the points shown by the arrows and remove
light A-fig. 175;
❒ open the protective flap B-fig. 176;
❒ replace bulbs C by releasing them from the side con-
tacts and making sure that new bulbs are correctly
clamped between these contacts;
❒ close the flap B and fasten the courtesy light A-fig. 175
in its housing, making sure it is locked in correctly.