FIAT Punto 2012 User Manual
Page 242
F0U0193m
fig. 217
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass tyres.
All approved tyres are listed in the Log Book.
IMPORTANT In the event of discrepancies between the in-
formation provided in this Owner Handbook and the Log
Book, the latter takes precedence.
To ensure driving safety, ensure that tyres of the same
make and type are fitted on all wheels.
IMPORTANT Do not use inner tubes with tubeless tyres.
SPARE WHEEL
Pressed steel rim
Tubeless tyre.
WHEEL GEOMETRY
Total front toe in:
+ 1 ± 1 mm
Total rear toe in:
+ 1.7 ± 2 mm
The values refer to the car in running order.
CORRECT READING OF THE TYRE fig. 217
Example: 175/65 R 15 84T
175 = Nominal width
(S, distance in mm between sidewalls).
65 = Height/width ratio (H/S) as a percentage.
R
= Radial tyre.
15 = Rim diameter in inches (Ø).
84 = Load index.
T
= Maximum speed index.
240
CONTENTS
TECHNICAL
SPECIFICATIONS
SERVICING
AND CARE
IN AN
EMERGENCY
WARNING LIGHTS
AND MESSAGES
STARTING
AND DRIVING
SAFETY
KNOWING
YOUR
VEHICLE