FIAT Punto 2012 User Manual

Page 195

193

KNOWING

YOUR

VEHICLE

SAFETY

STARTING

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

SERVICING

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

F0U0167m

fig. 179

BOOT LIGHT fig. 180

To change the bulb, proceed as follows:
❒ open the boot;
❒ remove the light A-fig. 180 by levering on the point

shown by the arrow.

❒ open the protective cover B and replace the snap-fitted

bulb;

❒ re-close the protective cover B over the lens;
❒ refit the light A by inserting it in its correct position first-

ly on one side and then on the other until it clicks into
place.

F0U0168m

fig. 180

PUDDLE LIGHTS fig. 181
(for versions/markets where provided)

To change the bulb, proceed as follows:
❒ remove the light by pressing clip A-fig. 181 with a screw-

driver;

❒ press the sides of bulb shield B-fig. 182 on the two fas-

tening pins and turn it;

❒ replace the snap-fitted bulb C;
❒ reposition the bulb shield by fitting the two fastening

pins;