Tanita UM-041 - Manual (Page 8)

6
General Programming
You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.
The unit will prompt you through the set up.
The display will highlight the function and the unit will beep after each step has been completed.
Use the Up/Down buttons to select a personal data number. Use the Set button to store data.
1. Turn on Power
Use the Set button to activate the unit.
The unit will beep twice and the display will flash all data three
times to confirm the programming. The power will then shut
down automatically.
Warning
Do not use the body fat reading feature of this product if you have a pacemaker or other implanted electronic medical device.
2. Select Personal Data Number
Personal data numbers store your personal data.
Use Up/Down buttons to select a personal data number.
Press Set.
3. Set Age
Use Up/Down buttons to select age.
Press Set.
4. Select Female or Male
Use Up/Down buttons to select Female ( ) or Male ( ).
Press Set.
5. Specify Height
Use Up/Down buttons to select height.
Press Set.
SETTING AND STORING PERSONAL DATA IN MEMORY