Edimax Technology PS-3207U - Manual (Page 141)

133
9.4 Modify Setting Values
– “set” Command
“set” command is used to modify the setting values of
this pr int ser ver. The for ma t of “s et” c omma nd is as
f ollowing:
se t a r gument_na me va lue
Then the va lue will be wr itte n into the s ys te m
c onf igurat ion . For e xa mple , if you want to set IP addr ess of
the pr int se r ver to 192.168.2.2, type “se t ip 192.168.2 .2”
c omma nd and the I P of the pr int s e rver wil l be changed.
Af ter the s ett ing is f inishe d, please r eboot the pr int s er ver .
admin# se t ip 192.168.2.2
admin# r eboot
If you ente r only “s et” , the s ys te m wil l list a ll
a rguments of “ set” co mma nd and the comma nd for mat .
The following table lists a ll t he a r guments whos e va lue
c an be modif ie d by “se t” comma nd:
Argument Description Example
psname Print server name set psname PS001
password Login password set password 1234
username Login username set username admin
wlfunc Enable or disable the
wireless LAN function.
The value should be
“disabled”, “enabled” or
“auto”
set wlfunc auto
wlmode Wireless LAN mode is
Infrastructure or Ad Hoc.
The value should be
“inf”
or “ad hoc”
set wlmode ad hoc
ESSID ESSID of the wireless LAN set ESSID default