Edimax Technology BR-6215SRg User Manual

Page 12

Times to

Select the period in which you wish to end daylight Savings Time

Click on NEXT to proceed to the next page (step 2) Broadband Type.

Step 2) Broadband Type

In this section you have to select one of four types of connections that you will be using to connect your broadband
router’s WAN port to your ISP (see screen below).

Note: Different ISP’s require different methods of connecting to the Internet, please check with your ISP as to the type of
connection it requires.

Description

Cable Modem

Your ISP will automatically give you an IP address

Fixed-IP xDSL

Your ISP has given you an IP address already

PPPoE xDSL

Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE)
connection.

PPTP xDSL

Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.

L2TP xDSL

Your ISP requires you to use a Layer Two Tunneling Protocol (L2TP) connection.

Telstra Big Pond

This Protocol only used for Australia’s ISP connection.

Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2, 1.3, 1.4, 1.5 or 1.6). Click
on Back to return to the previous screen.

1.1

Cable Modem

Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP’s may also require that you fill in
additional information such as Host Name and MAC address (see screen below).

Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require
these settings for you to connect to the Internet.