Edimax Technology AR-7284WnB - Manual (Page 87)

82
3.4.3.3 IP Address
In the Access Controls page, click IP Address. The page
shown in the following figure appears.
In this page, you can configure the IP address used with
access control list (ACL). If ACL is enabled, only devices with
the specified IP addresses can access the device.
Select Enable Access Control Mode to enable ACL.
Note:
If you enable the ACL capability, ensure that IP address of the host is
in ACL list.
Click Add. The page shown in the following figure appears.
Click Apply to apply the settings.