Edimax Technology AR-7284WnB - Manual (Page 86)

81
Click Apply to save the settings.
3.4.3.2 Services
In the Access Controls page, click Services. The page
shown in the following figure appears.
In this page, you can enable or disable the services that are
opened to remote host. For example, if telnet service is
enabled, the remote host can access the device by telnet
through port 23. Normally, you don’t need to change the
settings.
Select the management services that you want to enable or
disable on the LAN or WAN interface.
Click Apply to apply the settings.
Note:
If you disable HTTP service, you cannot access the configuration web
page of the device any more.