Edimax Technology AR-7284WnB - Manual (Page 54)

49
Enter the Filter Name and specify at least one of the
following criteria: protocol, source/destination IP address,
subnet mask, and source/destination port.
Click Apply to save the settings.
Note:
The settings only apply when the firewall is enabled.
The ACTIVE INBOUND FILTER shows detailed information
about every created inbound IP filter. Click Delete to remove
an IP filter (only appears when an IP filter exists).
3.3.5.2 Outbound IP Filtering
By default, all outgoing IP traffic from the LAN is allowed. The
outbound filter allows you to create a filter rule to block outgoing
IP traffic by specifying a filter name and at least one condition.