Edimax Technology AR-7284WnB - Manual (Page 56)

51
Enter the Filter Name and specify at least one of the
following criteria: protocol, source/destination IP address,
subnet mask, and source/destination port. Click Apply to
save the settings.
3.3.5.3 Bridge Filtering
In the Filtering Options page, click Bridge Filtering. The
page shown in the following figure appears.This page is used
to configure bridge parameters. In this page, you can change
the settings or view some information of the bridge and
attached ports.
Click Add to add a bridge filter. The page shown in the
following figure appears.