Edimax Technology AR-7211B - Manual (Page 7)

6
1-1 Package Contents
 One single port router
 One external splitter
 One power adapter
 Two pieces of telephone lines(RJ-11,more than 1.8m)
 One piece of Ethernet cable(RJ-45, more than 1.8m)
 One piece of USB cable
 One copy of Quick Installation Guide
 One copy of driver and utility software CD (optional)
1-2 Safety Information
Follow these announcements below to protect the device from risks and damage
caused by fire or electric power.
 Use volume labels to mark the type of power.
 Use the power adapter packed within the device package.
 Pay attention to the power load of the outlet or prolonged lines. An overburden
power outlet or damaged lines and plugs may cause electric shock or fire accident.
Check the power cords regularly. If you find any damage, replace it at once.
 Proper space left for heat radiation is necessary to avoid any damage caused by
overheating to the device. The long and thin holes on the Access Point are
designed for heat radiation to make sure the device works normally. Don’t cover
these heat radiant holes.
 Do not put this device close to a place where a heat source exits or high
temperature occurs. Avoid the device from direct sunshine.
 Do not put this device close to a place where is over damp or watery. Do not spill
any fluid on this device.
 Do not connect this device to any PC or electronic product, unless our customer
engineer or your broadband provider instructs you to do this, because any wrong
connection may cause any power or fire risk.
 Do not place this device on an unstable surface or support.