Edimax Technology AR-7211B - Manual (Page 22)

21
The following table describes the fields of this screen.
Label Description
IP Address Input the IP of Local area network interface here.
Subnet Mask We recommend that you use an address from a block
that is reserved for private use. This address block is
192.168.1.1- 192.168.255.254
Secondary IP Select this checkbox to enable the secondary LAN IP.
The two LAN IP must be in the different network.
Apply Changes Click this button to save the settings of this page.
3-4-2 DHCP Settings
DHCP(Dynamic Host Configuration Protocol) allows the individual client(computers) to
obain the TCP/IP configuration at start-up from the centralize DHCP server. You can
configure this router as a DHCP server or disable it. DHCP server can assign IP address, an IP
default gateway and DNS server to DHCP clients. This router can also act as a surrogate
DHCP server(DHCP Proxy) where it relays IP address assignment from a actual real DHCP
server to clients.
If the DHCP was disabled, the screen of Fig 3.4.2-1 appears. You can enable/disable
DHCP Server or DHCP Proxy.
Fig 3.4.2-1