Edimax Technology AR-7211B - Manual (Page 19)

18
3-3 Wizard
The setup wizard enables speedy and accurate configuration of your Internet
connection and other important parameters. The following sections describe these various
configuration parameters. Whether you configure these parameters or use the default ones,
click “Next” to enable your Internet connection.
When subscribing to a broadband service, you should be aware of the method by which
you are connected to the Internet. Your physical WAN device can be either Ethernet, DSL, or
both. Technical information regarding the properties of your Internet connection should be
provided by your Internet Service Provider (ISP). For example, your ISP should inform you
whether you are connected to the Internet using a static or dynamic IP address, or what
protocols, such as PPPOA or PPPoE, you will be using to communicate over the Internet.
Click Wizard in the sub-menu to open the screen of Fig 3.3.1-1. In this page, and the
Wizard will guide you to finish password/time/Internet connection settings.
Fig 3.3.1-1
Be sure to use the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI) numbers assigned to you. The valid range for VPI is 0 to 255 and for VCI is 1 to 65535.