Edimax Technology IC-3010 - Manual (Page 47)

47
2.5 Motion Detection
Motion detection function makes this IP camera become your non-stop guard. You don ‟t
have to waste all the time monitoring the images from the camera, and camera will detect
all motions for you. Once motion is detected, a captured image or video recording will be
sent to you by Email or via FTP.
You can access this menu by clicking „Motion Detection‟ on the top of web management
interface.
2.5.1 Motion Detection Settings
You can use this menu to setup basic motion detection settings:
The descriptions of every setting in this menu will be given below:
Item Description
Motion Detection
Enable
Select „Enable‟ to enable motion detection, and select
„Disable‟ to disable this function.
Next Event
Detected Interval
Specify the time interval between two motion detections in
seconds. If a motion is detected after last detection time,
and before next detection time, nothing will be send by
Email or via FTP.
Please specify a time interval that suites your need. If the
time interval is too long, you may not be able to know what