Edimax Technology IC-3010 - Manual (Page 21)

21
1.8 Log Onto Web Management Interface
Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet
Explorer and type the IP address of the IP camera in address bar of Internet Explorer. You
should be prompted to input the user name and password:
Default user name is
„admin‟ (in lower case) and password is „1234‟. Click „OK‟ to continue
after user name and password has entered.
If you ‟re rejected, maybe the password has been modified previously. This should not
happen if this is a newly-purchased camera, however, if you get the camera from someone
else, the password would be changed. Please try to obtain the correct user name /
password, or you
‟ll have to reset the camera.